To install your vinyl straps you will need an old pan larger enough to heat enough water to submerge the vinyl. Heat the water to about 200 decrees F or until the bubbles begin to form on the bottom of the pan. Submerge the precut straps completely under the hot water for at least 3 - 5 minutes. Then carefully remove one strap at a time and connect one end on the strap to the frame with the appropriate connector just as the original vinyl was connected. Immediately stretch the vinyl to the other side and connect this side to the frame as it was originally connected.
If you have any questions about specifics of this you may contact us.
|
|